Description
Factory Jeep Commander Workshop Manual (2006-2010)
This official factory-level repair manual covers every Commander XK and XH built between 2006 and 2010, giving US-market owners and technicians complete service data from wiring diagrams to torque specs.
Powertrain & Drive Coverage
| Component | Variants Covered |
|---|---|
| Petrol | 3.7L PowerTech V6 (EKG), 4.7L PowerTech V8 (EVA), 5.7L HEMI V8 (EZB) |
| Diesel | 3.0L V6 Turbodiesel |
| Transmissions | 5-speed automatic 545RFE, 5-speed automatic NAG1 (W5A580) |
| Drive | 4×2 RWD; 4×4 with Quadra-Trac II and Quadra-Drive II transfer cases |
| Model Years | 2006, 2007, 2008, 2009, 2010 |
| Badge Twins | N/A |
Common Commander Repairs Covered
| System | Procedures |
|---|---|
| 5.7L HEMI MDS Lifter Failure | Cylinder deactivation solenoid replacement, lifter and camshaft inspection, MDS system diagnosis |
| 545RFE Transmission Slipping | Solenoid pack replacement, valve body service, transmission fluid and filter change procedures |
| Front Differential / Transfer Case Noise | Quadra-Trac II and Quadra-Drive II fluid service, actuator diagnostics, differential bearing replacement |
| TIPM (Totally Integrated Power Module) Faults | Relay and fuse testing, module replacement, full electrical wiring diagram reference for fault tracing |
Format & Delivery
PDF. Instant download; lifetime re-downloads.
Frequently Asked Questions
Does the manual cover both the 545RFE and NAG1 transmissions?
Yes. Both automatic gearboxes fitted to the 2006-2010 Commander are fully covered. The 545RFE (used primarily with the 3.7L and 4.7L engines) and the NAG1/W5A580 (paired with the 5.7L HEMI) each have dedicated overhaul, fluid specification, and diagnostic sections within the manual.
Does this manual cover the XH model sold outside the US?
Yes. The manual covers both the XK (primary North American Commander) and the XH variant. Left-hand and right-hand drive configurations are both addressed, though the powertrain and chassis procedures are largely identical across markets.
Are Quadra-Trac II and Quadra-Drive II transfer case procedures included?
Yes. Full service procedures for both transfer case systems are included, covering fluid changes, actuator and encoder motor diagnostics, front axle disconnect service, and complete disassembly/reassembly torque specifications for the NV140 and NV245 units.
What format is the manual?
The manual is delivered as a fully searchable PDF. It can be opened on any Windows, Mac, iOS, or Android device using a standard PDF reader, and individual pages or full sections can be printed for bench use.
Reviews
There are no reviews yet.